Self-Regulating Heating Cable 120V 5Watts/Ft 18 Feet B7277
Self-Regulating Heating Cable 120V 5Watts/Ft 18 Feet B7277
SWISS Manufactured Commercial Grade with 100% Quality Control; ETL certified
30 YEARS of successful experience in electric heating cables
REDUCE ENERGY COSTS; Cables automatically adjust heat output to ambient temperature; Operates in temperatures down to negative 40 degrees; Save energy – no thermostat needed
PROTECT YOUR HOME: Our product will give you peace of mind knowing that you and your home are PROTECTED from any potential damage caused by burst pipes or the inconvenience of no running water
HOW TO USE: Use for heating FRESHWATER supply pipes, SEWER pipes, DRAINAGE pipes, TANKS or SOIL heating; Can be used on all METAL AND NON-METAL pipes, including copper, galvanized steel, polyethylene, polypropylene, PVC, etc; The cable can be installed INSIDE the pipe if the water is not intended for consumption and is not under pressure; Can be overlapped during installation and operation–CABLE WON’T OVERHEAT. 3-foot cold lead on cable.
PipeMate Self-Regulating Heating Cable is specifically designed for residential pipes to keep water flowing in freezing temperatures. PipeMate can be used for heating freshwater supply pipes, sewer pipes, drainage pipes, heating tanks or soil heating.
It’s direct-to-consumer Swiss manufactured, with 100% quality control. This means we test every single cable made. Manufactured by GammaSwiss – 30 years of success in electric heating cables used in industry all over the world, now available to you for your home. PipeMate comes with a 4-year Warranty, and is ETL Certified.
Each cable measures 8.8x5.6mm, consists of a durable PVC inner insulation and a continuous ground braid. This guarantees maximum safety and reliability. The illuminated plug helps to easily see when your cable is functioning. Each cable has a 3-ft cold lead, plus the self-regulating length listed. PipeMate cables can be overlapped during installation and operation, will not overheat, and can be used on all metal and non-metal pipes, including copper, galvanized steel, polyethylene, polypropylene, PVC, etc. To increase energy efficiency, heating cables must be used in conjunction with thermal insulation. The cable can be installed inside the pipe if the water is not intended for consumption and is not under pressure.
Be sure to read the installation manual and follow all instructions. “Self-regulating” means the cable automatically adjusts its heat output according to the outside temperature: colder outside=hotter cable, less cold outside=less hot cable. This way the cable only uses as much energy that’s needed to prevent pipes from freezing. If part of the cable is on a colder area, then only that part will get warmer – the entire cable adjusts independently. Our solution will give you peace of mind knowing that your home is protected from any potential damage caused by frozen and bursting pipes.